K.D. BraininFounder & Director

Tutorial No. 110: Water Safety

Blog: 7.02.2017

Water Safety is the single most critical issue facing water birth enthusiasts.

It is square one.

Hygiene standards must be of the highest order to prevent cross-infection and avoid the risk of water borne infection with bacteria such as Psuedomonas & Legionella.

meadow-birth-centre-worcestershire-royal-hospital-6

Active Birth Pool’s Approach

We believe in keeping things simple.

Our water birth pools:

  1. are made in one solid-seamless piece of the highest grade material available
  2. can be cleaned and disinfected with 10,000ppm hypochlorite (or similar)
  3. are filled from a thermostatic digital mixing valve connected directly to the hospitals water system
  4. don’t have fittings that serve as a breeding ground for bacteria and cross-infection

Other Approaches

Some birth pools are equipped with features that at first might seem like an advantage, but in reality present unacceptable infection control risks.

These pools are banned from use in UK hospitals.

Integral Plumbing Systems

UK Department of Health regulations stipulate that water birth pools are filled from thermostatically controlled wall mounted mixer taps plumbed directly into the hospitals water supply.

Some water birth pools on the market have their own built-in plumbing systems.

These systems interface between the pool and the hospitals water system and present a well documented infection control risk.

Plumbing systems like these utilise surface mounted fittings, flexible & non-flexible piping, overflow drains, handheld showers, pumps, hoses, heaters and filters.

Stagnant water within the system is an ideal breeding ground for bacteria.

These systems are impossible to clean, disinfect or monitor and therefore present an extremely high Infection Control Risk.

ficore-birthing-pool

Re-circulating water systems

Re-circulating or pumped systems with jets such as whirlpools & jacuzzi present the perfect conditions for the growth of micro-organisms.

Water systems like these present the highest levels of risk as they produce aerosols.

Aerosols are generated when the water surface is broken – for example, by falling water droplets, splashing, or by bubbles breaking at the surface.

Once introduced to these systems, Legionella and Pseudomonas thrive and can become aerosolised and then inhaled.

95princes-water-birth-pool-qeh-kings-lynn

Pumped heating systems

Heating systems for water birth pools are not necessary and present unacceptable infection control risks.

Water is pumped through a heat exchanger and then back into the pool creating the ideal environment for bacteria to breed.

These systems present one of the highest infection control risks and should not be utilised.

Overflow drains

Overflow drains harbour bacteria and can serve as a conduit for cross infection.

Regulations are very clear on this point.

Overflow drains should not be fitted to water birth pools as they constitute a constant infection control risk.

Hand held showers

Handheld showers present a significant infection control risk.

If the shower head falls in the pool it may be contaminated with bacteria that could breed and be passed on next time the shower is used.

Department of Health regulations clearly stipulate that handheld showers and bath/shower mixers are not installed for use with water birth pools as they present a Fluid Category 5 risk to the mains water supply.

Bacteria filters and disinfection systems

Some water birth pools are equipped with these devices in an attempt to mitigate the risk of infection and bacteria infestation that are inherent in built-in plumbing systems.

Bacteria filters and disinfection systems can not be relied upon and will not guarantee adequate hygiene standards.

meadow-birth-centre-worcestershire-royal-hospital-5

Active Birth Pool: Worcester Hospital

Installed in accordance with UK Dept. of Health and NHS regulations

A thermostatically controlled digital tap on the wall connected directly to the hospitals water supply system with drainage emptying into the hospitals waste water system.

Fabricated in one solid piece of Ficore composite without seams or seals, impervious to bacteria and the effects of cleaning and disinfection.

For more information about Water Safety see the Water Birth Safety Initiative

 
 
 

Contact us for more information or a quote
 

related

Pin It on Pinterest

Share This

Share This

Share this post with your friends!